8
Paging Volume Adjustment
In standby mode, press the 6Volume switch at the bottom of WDC-244L to adjust the paging volume. It
can be adjusted by three levels (low-normal-high) by pressing the button
consecutively. If no input for 3 seconds, the device goes back to standby mode.
Call Volume Adjustment
While talking, press 6Volume switch at the bottom of WDC-244L to adjust the call volume. It can be
adjusted by three levels (low-normal-high) by pressing the button consecutively. If no input for 3 sec-
onds, the device goes back to talking mode.
Door Release
While talking, press the 4Select button to release the door striker connected to WDR-244DS (the
releasing relay is on for 1 second and off).
Line Busy Notice
Busy notice of a triple beep is enabled if 2 units of WDR-244DS are installed and one is in talking
mode with one of WDC-244L devices. If the paging button of any of the paired WDC-244L devices, a
triple beep will sound to indicate the line is busy.
