3
3. Operation
3-1. Communication Functions
- Lift the hand set or press the speaker button to hear a dial tone.
when all channels are engaged, FU is displayed on LED and a busy tone will sound when lift the handset,
wait and try to call later.
●
- Press the station number to call.
If the number is engaged, the busy tone will sound every second.
●
●
If the number is non-existent,a busy tone will sound every half second.
- Talking can commence when the other station's handset is lifted. Handset must be lifted to talk even though
the speaker button was used to dial.
3-2. Hold/Mute Function
- Press the hold button to place the receiving station on hold. A simple melody will be played.
- To resume conversation press the hold button again.
3-3. Conference Call / Follow Me Function
Up to thtee stations including yourslf can thave a conference talk by using the transfer(Follow Me) function.
- Lift handset and press the first station number you wish to conference with.
- Press the hold when this is answered.
- Dial the next station number.
- After both stations are connected depress the hold button again to allow all three stations to communicate.
- When you want to disconnect the last station, put the handset down for 2 seconds then, pick it back up and
press the hold button. Continue conversation with the first station.
3-4. Paging Function
There are two options for paging.
1) All paging which contacts the whole network.
2) Group paging which contacts a group of stations in the network.
