1. Part Names.
2. Wiring and Installation
LED & Sensor
Microphone
Camera Lens
Speaker
Call Button
Angle Adjustment Lever
Wall Bracket
Volume
Adjuster
Monitor Connection
Terminal
SCREW M3X8(1EA)
SCREW T4X18(2EA)
[FIG-1]
[FIG-2]
①
Fix a bracket on a wall with screws
②
[FIG-2]
③
Put a door camera unit into a wall bracket
④
Wire door release connection terminal as shown in [FIG-2]
⑤
Tighten a screw at the top side of a door camera. [FIG-1]
Wiring #1, 2, 3, 4 on the back side of a door camera with
a monitor as shown in
