Commax DRC-4CPNK, Руководство пользователя, Страница: 7 / 8

7
5. How to open the door using keypad button
* Note: If you press 'Call button' during operation, you can cancel the current operation.
1. How to set the door open password
1-1 If you know the current password
(1) Press 'M' button for more than 2 seconds: The beep sound is heard and LED light is on.
(2) Enter current password (Initial value: '1234')
(3) Press 'M' button for more than 2 seconds
☞
Enter password setting mode : LED light to start blinking and new password can be set.
(4) Enter new password: Enter the new password to use. (4 to 12 digits)
(5) Press 'M' button for more than 2 seconds: After beep sound, password has been changed.
1-2 If you forget your current password (It can be used when connected household monitor)
(1) Repeat pushing door open button on household monitor more than 7 times quickly.
(in less than 20 seconds)
☞
Enter password setting mode : LED light to start blinking and new password can be set.
(Caution: To prevent malfunction, please do not repeat pushing door open button normally.)
(2) Enter new password: Enter the new password to use. (4 to 12 digits)
(3) Press 'M' button for more than 2 seconds: After beep sound, password has been changed.
2. How to open door using password
2-1. Lock 1 open :
‘1’ + 'M' + Pa ‘M’
☞
Exit the mode after opening the 1st door lock with the door opening sound. (Tu-ru-ru)
2-2. Lock 2 open :
‘2’ + 'M' + Pa ‘M’
☞
Exit the mode after opening the 2nd door lock with the door opening sound. (Tu-ru-ru)
* Cautions *
- Please set the password after installation. (Initial password can not be used.)
(For security reasons, 1234 and 4321 can not be set as the password.)
- If you enter wrong password, the setting mode is ended with a failure sound. (toot-toot)
- The setting mode is ended when there is no password input on household monitor for 1 minute
after entering the password input mode.
- The setting mode is ended when there is no additional input for 20 seconds during input.
(Even if you press 'M' button during password setting, it can not be saved and only the number
is recognized and saved.)
* Cautions *
- If the door open button of household monitor is pushed when using password, the operation
is canceled.
- If the power of the camera is cut off due to black-out or other reasons, the door will not
open. Please prepare a separate emergency key in case of emergency.