3
Important Safety Instructions
13. Power-Card Protection
- Power-supply
cords should be routed so that they are not
likely to be walked on or pinched by items
placed upon or against them paying
particular attention to cords at plugs,
convenience receptacles, and the point
where they exit from the product.
14. Protective Attachment Plug
- The product
is equipped with on attachment plug having
overload protection. This is a safety feature.
See instruction Manual for replacement of,
or resetting the protective device. If
replacement of the plug is required, be sure
the service technician has uses a
replacement plug specified by the
manufacturer that has the same overload
protection as the original plug.
15. Outdoor Antenna Grounding
- If an
outside antenna or cable system is
connected to the product, be sure the
antenna or cable system is grounded so as
to provide some protection against voltage
surges and built-up static charges. Article
810 of the National Electrical Code,
ANSI/NFPA 70, provides information with
regard to proper grounding of the mast and
supporting structure, grounding of the lead-
in wire to an antenna discharge unit, size of
grounding conductors, location of antenna-
discharge unit, connection to grounding
electrodes, and requirements for the
grounding electrode (Refer to the figure on
page 5 ).
16. Lightning
- For added protection of this
product during a lightning storm, or when it
is left unattended and unused for long
periods of time, unplug it from the wall outlet
and disconnect the antenna or cable
system. This will prevent damage to the
product due to lightning and power-line
surges.
17. Power Lines
- An outside antenna system
should not be located in the vicinity of
overhead power lines or other electric light
or power circuits, or where it can fall into
such power lines or circuits.
When installing on outside antenna system,
extreme care should be taken to keep from
touching such power lines or circuits as
contact with them might be fatal.
18. Overloading
- Do not overload wall outlets,
extension cords, or integral convenience
receptacles, as this can result in a risk of
fire or electric shock.
19. Object and Liquid Entry
- Never push
objects of any kind into this product through
openings as they may touch dangerous
voltage points or short-out parts that could
result in a fire or electric shock. Never spill
liquid of any kind on the product.
20. Servicing
- Do not attempt to service this
product yourself as opening or removing
covers my expose you to dangerous voltage
or other hazards. Refer all servicing to
qualified service personnel.
21. Damage Requiring Service
- Unplug this
product from the wall outlet and refer
servicing to qualified service personnel
under the following conditions.
A. When the power-supply cord or plug is
damaged.
B. If liquid has been spilled, or objects have
fallen into the product.
C. If the product has been exposed to rain
or water.
DPV-4AE 2006.9.26 3:1 PM 페이지3