Commax CMV-70S, Руководство пользователя, Страница: 6 / 22

6
3) Monitoring
①
Press the “Monitoring button” in standby mode, you can check the image in order.
- Camera 1 → Camera 2 → OFF → Camera 1 → repeat
②
Press “Call” button during monitoring to call to the entrance.
4-1-2 Use for MODUM system
- This function is only for MODUM system.
- If the MODUM system is connected, it is automatically recognized when it boot.
Please reboot the power after installation for stable operation.
1) Communicate with visitor
(1) Communicate in monitor
(a) Paging from a common entrance
①
When a visitor page from a common entrance, the paging tone rings and the visitor’s
figure appears on the monitor.
②
Press “Call” button to talk to the visitor and “Door release” button to open the door.
(The door release function is enabled only when the screen is turned on.)
③
If another visitors calls from an individual entrance, the paging tone rings and press
“Monitoring” button to receive a call from the individual entrance after finishing the
communication with a common entrance.
④
Press “Call” button to finish the call and convert to standby mode.
(b) Paging from an individual entrance
- Same as the Single system mode.(Except interphone related information)
- The paging tone rings when it is received a paging from a common entrance or guard
station while talking with the individual entrance. Press “Guard and interphone” button
to connect after finishing communication with the individual door unit.
2) Communication with a guard
(1) Receive a call
①
The paging tone rings when receive a call from guard station.
②
Press “Call” button to communicate.
③
When it receive any paging from an individual door camera, the paging tone rings and
press “Monitoring” button to receive a call from the individual door camera after
finishing the communication with a guard station.
④
Press “Call” button to finish the communication and convert to standby mode.