9
4) Page the elevator
- If the elevator is connected with monitor, you can use this function.
- In the standby mode, if you press the “Guard & Interphone” button, the additional menu will
be displayed at the lower-right corner of screen.
- For paging elevator, press the door release button while the menu is displayed.
- When you page the elevator, “EVL CALL” message will be displayed at the top of screen.
- After paging the elevator, the screen will be back to the standby mode.
- If you don’t page the elevator, press the
'Talk'
button.
- Press “Menu” button in video call or monitoring mode then Setting OSD will be
shown on screen.
7. Settings
-
After Menu screen appears, you can change setting with below 4 buttons
Menu start and finish :[ ] (Menu button -‘[ ] ’)
select and input
: [ ] (
Interphone
button-‘[ ] ’)
Move upward /move right : [
] (Door release button –‘▲’ / ‘
▶
’)
Move downward /move left : [ ] (
Monitoring
button–‘▼’ / ‘
◀
’ )
