12
- When the function is active (red), the corresponding function is activated. (You can turn off it
by click.)
- CCTV1 is recorded in case of sensor 1 emergency, and CCTV2 is automatically recorded in case
of sensor 2.
(If there is no SD card, it will be replaced with steel cut image. If CCTV is not connected to the
sensor, it will not be recorded.)
2) During Security mode :
ྞ
Indicates the security sensor being executed.
ྟ
End the security function.
- Press the button and enter the four-digit password. (Factory default password: 1234)
- If the password is correct, the mode is turned off and the screen returns to the main screen.
(If the password is incorrect, you can not turn the mode and please progress initialization of
the device.)
<Password input screen to turn off the mode> <Sensor detected screen during security mode>
1)
When security alarm occurs
- When a sensor is detected during security mode, an alarm is generated, and the sensor
number(Sensor1 or Sensor2) and the time of occurrence are displayed.
- If the emergency situation is canceled, press 'Stop' button at the bottom.
(You can turn off the alarm if the corresponding sensor is recovered to normal status.)
- When the password input window appears, enter the four-digit password using the key
buttons.
- Alarm sound occurs for 3 minutes and then only alarm screen is displayed after then.
(During the alarm occurs, the calling sound rings by the camera to indicate the
emergency situation.)
4-6 Option
- When you touch option button, the below screen will be shown.
- When you select each item, the corresponding sub item is displayed on the right.
- If you do not do any action for 30 seconds after you get in Option menu, the main screen will be
shown.
