14
3-6. Security (Can be used with security sensor)
-
-
-
Touch the Security button to display the following screen.
Using this function, the door is detected when the sensor is connected.
This function setting (On and Off/ save video / log view) is possible only by ID1 (MASTER device).
(In case of extension phone (ID2 ~ ID4), only the alarm rings.)
< Before operation >
< During Operation >
1) Before operating Security mode
※ Caution
Be aware of the password before proceeding.
You cannot turn off the alarm if you don’t know current password. (Factory default : 1234)
① Security Sensor 1, Security Sensor 2: Select sensor to operate.
② Select check box : If the sensor is selected by check box. (Turn on & Turn off)
③ Execute button: Activate the selected sensor. (Please note that the alarm occurs when sensor is detected)
④ Emergency log : You can check emergency log. (Up to 255 log can be stored)
⑤ Auto recording: CCTV is automatically recorded for 10 seconds when an emergency occurs.
- When the function is active (red), the corresponding function is activated. (You can turn off it by click.)
- CCTV1 is recorded in case of sensor 1 emergency, and CCTV2 is automatically recorded in case of sensor 2.
(If there is no SD card, it will be replaced with steel cut image. If CCTV is not connected to the sensor, it will
not be recorded.)
2) During Security mode : The LED light of MASTER unit is flickering on red.
⑥ Indicates the security sensor being executed.
⑦ End the security function.
-
Press the button and enter the four-digit password. (Factory default password: 1234)
-
If the password is correct, the mode is turned off and the screen returns to the main screen.
(If the password is incorrect, you can not turn the mode and please progress initialization of the device.)
<<Password input screen to turn off the mode> <Sensor detected screen during security mode>
