5
※
Caution
•
2 Door cameras and 2 CCTV cameras
•
To avoid noise on the LCD , please keep Max. space among each video line of
camerasTo avoid noise on the LCD, put 5 lines of UTP cable together and use it for
GND when UTP[CAT.5] is used for door camera.
•
Regarding CCTV wiring, put all lines, except the lines for video, together and use it
for GND to avoid video noise when UTP[CAT.5] is used.
•
You do not insert or take for Micro SD When you on/off power switch or take image
and save you do not insert or take because products can be critically damaged.
Please be careful. (Data in built-in memory or Micro SD may be deleted, Product
malfunction and etc...)
•
Internal memory has limited capacity, if you use Micro SD and over the memory,
you should save important file and backup data as old file will be deleted first.
•
For the Video Quality Guarantee saved in the memory, it should apply the Micro SD
having the conditions as bellows.
•
If not, then video quality cannot be guaranteed
•
Micro SD [T-FLASH] suggested Spec –Please after format use the product
1) Manufacturing : SANDISK
Micro SD : 2GByte
Micro SDHC [CLASS 6] : 4 ~ 16GByte
2) Manufacturing : TRANSCEND
Micro SD : 2GByte
Micro SDHC [CLASS 6] : 4 ~ 16GByte
3) Micro SDHC [CLASS 6] : It will be saved 400 min image when you use 4GByte.
But, the time of saving can be changed according reflected in the camera as
multiple colors and moving subject.
•
In this products built in Super Cap.
Super Cap can prevent damage of the file when power cut, when switch off Super
Cap can make internal time circuit during timed.
Super Cab should be charged about 10 min and when block the power can make
time circuit during 48 hours If block the power during the saving video it can be
stopped circuit within 48hours, If supply power, you should be checked time setting.
* Please check and set because the products have time error.
•
Micro SD [T-FLASH]Card insert methods
Please insert Micro SD Card as below picture and right direction.
When you insert card please insert until the sounds.
