To Register/Delete Multi-layered
1. Press [Start] button.
2. Enter password.
0 1 2 3 4 5 *
Press [Start] button from
the outdoor handle.
Enter registered password
when LED light is on.
3.Press [Start] button 2 times
0 1 2 3 4 5 *
Press [Start] button twice in a row, press [4] and open the battery cover of
the indoor main part and press [Register] button, and multi-layered
authentication setting/delete will be changed.
- Setting alarm : Beeeeeep
- Delete alarm : Beep
[Register]
Press [start] button 2 times
Alarm Alert for Battery Replacement
1. The battery life may vary depending on the
manufacturer, date of manufacture, and usage
environment.
(Wireless interlock module not used,AA type
alkaline batteries*4EA, 10 times a day basis of
use can be used more than 10 months.)
2. If battery leakage occurs, the product may be
damaged. Please check it regularly
(apporx. Every 6 months.)
Warning
When warning light is on the number plate after
operation or if you hear ‘Beep, Beep, Beep’ sounds,
you need to change the battery. At this time,
you need to replace all the batteries for new one.
1. When Multi-layered Authentication mode is set,
you can open the door after pa
card / pa fingerprint authentication.
*Multi-layered authentication mode is not set
when it is in factory reset mode.
*Multi-layered authentication mode is deleted
when you set in same way of registration.
Note
Beep
Beep
Beep
