3. Settings
For settings, use 3 buttons as follows.
MENU (Enter/Select/Exit) : MENU button
Move up / Move right : UP button Move down/ Move left : DOWN button
In order to set UTILITY and check product information(product name and version),
press MENU button and then use UP/DOWN button during video telephony or
monitoring mode.
3-1-1 UTILITY(additional function)
Press MENU button and use UP/DONW button to move Utility list and press MENU
button again to select.
1) SPEAKER VOLUME : Adjustable ringtone which sounds when you answer the call
from the door.
Volume adjustment
- Use UP/DOWN button to move SPEAKER VOLUME setting menu in UTILITY list
- Press MENU button to enter.
- Adjust it with UP/DOWN button.
- If you finish the setting, press MENU button to exit.
2) SCREEN MODE : Adjustable screen ratio
①
ZOOM : Zoom out image(full of the screen) is shown
②
4:3 : Ratio of 4:3 image is shown(This is actual ratio for camera)
③
WIDE: Ratio of 16:9 image is shown(full of the screen)
3) Monitoring function
- The screen is turned on if you press the door button in stand-by mode.
- The screen will be turned on for 30 seconds after the time you press the door button.
- By picking up the handset during monitoring, you can talk to a person at the door.
(On stand-by mode)Operation == being put handset down
- If you press the door button, the monitor works as follows in order.
camera1
(camera2)
OFF
camera1 ............
(During the communication with entrance)Operation == being picked handset up
- If you press door button, the monitor works as follows in order.
camera1
(camera2)
camera1
( camera2 ) ............
7