8
④
Press the "Extension" button on an in-house unit then the "*** -> S" message is
displayed on the Multi Entry Panel.
Register desired household number in Multi Entry unit, and then press "CalI"button.
⑤
The electric sound will be heard after completion
⑥
The registration is complete when you cancel the conversation.
(Repeat this process for other residence's registration.)
⑦
Set the ID as "1" on the multi-entry panel after completing the registration.
3) Chime sound from individual door unit
①
Chime will sound when calling an individual door bell with audio type
7. The Change and initialization of the password.
1) Initialization for the password
Shut off master unit and turn it on again while holding the
"Interphone call" button and "Door release" button at the same time
for 3 seconds. (Note: Default password: 1234)
2) Changing Resident Password(through Multi Entry panel)
①
Enter "Residence Number" and " "button for 2 seconds an release when LCD
stops blinking.
②
Enter "Current password" and press " "button for 2 seconds and release when the
LCD stops blinking.
③
Enter "New Password" with 4 digits on Multi Entry Panel displaying" NEW PW :
message. Press " " button for 2 seconds and release when the LCD stops
blinking.
④
Repeat "New password" to confirm it. Press " "button for 2 seconds release
when the LCD stops blinking. It is completion with initial mode.
Note) "1234" as a password can't be used to open the door because it's default password"
You can't open the door with password until you do change default password (1234)
into new password.