14
15
1. Remove the lens mount cap from the camera.
2. Install the auto-iris lens.
2-1. Cs mount type lens
Carefully align the lens mount with the camera
opening, then turn the lens slowly to install it.
2-2. C mount type lens
To allow for flange-back adjustment, install the
C-mount adaptor (option) on the lens mount,
then carefully align the lens mount with the camera
opening and turn the lens slowly to install it.
3. Connect the lens plug to the lens iris output connector
(LENS) on the side of the camera.
When using lenses from other makers, the plug shape
may not correspond to the terminal on the camera.
In such a case, remove the original plug and using a
soldering iron, connect a lens iris plug according to the
diagram. (Refer to next page.)
CONNECTIONS
MOUNTING THE LENS
* DC 12V TYPE
Basic connection
The peripheral devices (DVR, monitor, lens, etc), AC/DC
adaptor and cables are not supplied.
1. Connecting the monitor.
Make the video signal connection between the camera
and the monitor or time lapse monitor or DVR.
2. Use a commercially available DC12V adaptor.
Connect a DC 12V power source to the DC 12V input
terminal on the back of the camera.
3. Insert the plug of this power cord into a wall outlet.
The POWER indicator will light. Adjust the picture on
the monitor using the Brightness and Contrast controls
etc.
To monitor’s Video Input
or Camera Input
1
2
3
DC12V
POWER
VIDEO OUT
RS-485 ALARM D&N
GND OUT GND
EXT
DC12V
1
2-1
2-2
3
