Commander ATA302, Быстрый старт

Страница: 2 / 4

To Setup your new ATA 302, follow the steps below.
1. Position the unit and connect
your phone to the port
labelled ‘Phone 1’. Please
use a standard 2-wire phone
cable only. Cables with more
conductors may interfere with
the operation of some devices.
2. Connect the unit to the Internet
by taking the included Ethernet
cable and connecting one
end to a spare port on your
MODEM/Router and the other
end to the the port labelled
‘Internet’ on the ATA 302. You
must have an active and stable
Internet connection.
3. Take the power cord and
connect one end to the power
connection on the ATA 302 and
the other to a power outlet.
Ensure the power is turned on.
4. The ATA 302 will now contact
Commander’s servers to
provision and connect. It may
take up to 10-15 minutes to
complete this process. Please
do not interrupt the process.