Command Light K.L450A, Руководство пользователя, Страница: 11 / 36

USER GUIDE
11
Tools Required
Lifting device (crane, forklift, block and tackle, etc.)
Sling for lifting
Drill
21 /
64
” , 17 /
64
” drill bits
Hole punch for metal with
7
/
8
”
and 1
5
/
16
”
diameter capacity
Phillips head screwdriver, #2
Command Light flat blade screwdriver (included with light)
7
/
16
”
and
1
/
2
”
combination wrenches and/or ratchet and
7
/
16
”
and
1
/
2
”
sockets
8” adjustable wrench
Tongue and Groove Pliers
Wire stripper or razor blade knife
Solder-less wire connector crimp tool
Silicone based gasket sealer, RTV™ recommended
Installation Notes
The KNIGHT
2
weighs approximately 150 pounds. Use mechanical assistance to lift the
light into installation position such as a forklift or crane.
Use the provided fender washers under the mounting surface to distribute the weight load
evenly.
When routing the connecting electrical wires take care to avoid sharp bends, hot
components or other hazards to the wire.
The
KNIGHT
2
is not designed to be operated in a raised position while the vehicle is in
motion. The KNIGHT
2
includes warning circuit wiring to enable a warning device.