Model: GP-30 Guest Page System
System Overview
Guest Page System, Model GP-30, has a built-in transmitter that can page from 1 to 30 pagers. An
Expansion panel can be connected to enable the transmitter panel to page from 31 to 60 pagers.
The system works with rechargeable coaster pagers.
The System is designed to support a paging area of up to one mile. Paging distance may vary
depending on conditions.
Unpacking Guest Page
When you open the Guest Page box for the first time, inspect the contents. In the box you should find all of the items
needed for installation:
■
GP-30 Transmitter
■
10” Antenna
■
Power Adapter
■
Mounting Bracket and four screws
If any of these items are missing or damaged, contact the dealer where you purchased the unit, or call the number listed
in the “Service Information” section of this guide.
Component Overview
Guest Page System, Model GP-30
1. ON/OFF switch
2. Power input jack - plug the supplied 12V DC power
adapter here
3. 5-pin DIN socket – used for connection of
Expansion panel
4. Power and transmitting indicator
■
Solid
Red
when the system is powered
■
Flashes when the system is transmitting
5. Page button
Pages the corresponding pager or cancels the page.
6. Page indicator light
■
Solid red when the Guest Pager or Coaster Pager
is paged
■
Flashes when a page receives no response after
approximately 3 minutes, or when an urgency
page is activated.
7.
U
Button - urgency page
8.
*
Button - turns all pagers OFF
9. Antenna connector
10. Antenna
11. Magnetic pager OFF contact point
12. Mounting bracket screw holes
Guest Page Operator's Guide
3
