7 of 35
3.
Getting started
Power On
Insert the CF memory card that has Picture, Music, Movie or WMV9 files.
Press the “POWER” button to power on the ecoHD II, and then press the “TV
MODE” button to select the output mode.
Status After Power On
Status 1: If the “AUTOPLAY (Movie/ Picture/ All Files/ MultiLayer)” function is
enabled and there are media files on the CF card or the ecoHD II is already
connected to the display device, the ecoHD II will auto play media files after power
on.
Status 2: If the “AUTOPLAY” function is disabled, after power on the main menu will
appear as shown in the following figure. There are two groups in the main menu
(“/mnt/CF” and “SETUP”).
Power Off: Press the “POWER” button again to power off.
