Software Installation Guide
Software Installation Guide
10
11
1.Click "install" to install the software. Note: Computer RAM
needs to be 8GB or more.
3.Link the USB cable and turn on the machine, then click
“Connect“.
4.Click "Open File" to select the engraving file.
2.Click“Tools-Install CH340 Driver”.
1.Laser Grbl Tutorial
1.Laser Grbl Tutorial
5.Select the engraving mode and click "Next". (If you want to
engrave grayscale images, we recommend you to select "Line
To Line" or "1bit BW Di thering" mode; if you want black and
white images or cut, please select " Vectorize" mode)
.
6.Select carving parameters (M3 for constant power carving,
M4 for variable power).
7.Click "Boundary" to preview the engraving area and adjust
the position of the engraved object.
8.Click "Run Program" to start engraving.