7
4. To set the timer power off, start the unit and press the
Timer button on the control panel or remote control.
Note: The timer-power-off function can only be set when
the heater is in power-on mode. The digital display on the
control panel changes from the set temperature readout
to a time value for the timer. Press the Timer button
repeatedly to change the number value between a range
of 0 to 12 hours (in 1-hour intervals).
The Timer light turns on when the timer is set.
5. To set the timer power on, while powering off the unit
press the Timer button on the control panel.
Note: The timer-power-on function can only be set when
the heater is in power-off mode. The digital display on the
control panel will indicate time value for the timer. Press
the Timer button repeatedly to change the number value
between a range of 0 to 12 hours (in 1-hour intervals).
The Timer light turns on when the timer is set.
6. To replace the batteries, remove the battery cover (1)
from the remote by applying pressure to the battery
cover (1) and sliding it away from the remote. Insert two
AAA batteries (not included) (2) and close the remote by
placing the battery cover (1) back on the remote.
Note: Do not mix old and new batteries. Do not mix
alkaline, standard (carbon-zinc), or rechargeable (NiCad,
ni-mh, etc) batteries.
OPERATING INSTRUCTIONS CONT.
CLEANING THE AIR FILTER
4
5
6
1. Clean the air filter (2) after three months
or if it appears to be blocking airflow.
With the heater unplugged, remove the
two filter screws (1) as illustrated below.
Clean all parts of the filter assembly
and allow parts to completely dry.
2. Reassemble and reinstall the filter (2).
Warning: Do not use the heater without
the filter assembly in place.
TIMER
TIMER
1
2
1
2
