23
7. Connect one end of the matching hose to the water outlet of the solar heating plate and connect the
other end to the return end of the pool, respectively, and put on the stainless steel clamp and tighten.
8. Remove the plug from the backflow of the pool, turn on the valve for the filtration system, and make
sure water flow is freely in all the piping.
9. Plug in the power supply, start the filtration system, and the water begins to circulate, the solar heating
panel will starts to work and warm the pool water accordingly.
NOTE: Ensure all hose connections are tight and that the hoses are not kinked or bent at severe angles. If the
hoses are leaking, check to make sure all of the parts that have O-Rings have them attached and are screwed
on tightly. Do not over tighten the hose clamps.
Remove the plug
Water outlet
Inlet tot the pool
Open the valve of the
filtration system
