The system displays a message that it is searching for provisioning files.
The telephone's IP address is shown at the top of the display, on the right,
at the same time.
3. Write down the IP address.
Note:
Then make these settings:
•
Use the ▲▼
arrows
or touch the screen to navigate in the list.
•
Enter numbers and characters, either using the keypad or the screen
keyboard.
•
Press
OK
to confirm your selection or entry.
Configuring the language and location
1. Press
Country
.
2. Select
Phone language
.
3. Configure the language for the telephone (here: English).
The menu language changes.
4. Select
Location
.
5. Set the telephone's location.
6. Select
Language web interface
.
7. Configure the language for the web interface.
8. Press
Back
.
You return to the initial configuration.
9. To make more configuration settings, do one of the following:
•
Press
WebUI
to enable
Access > Web administration (https)
. You can
now conveniently configure additional settings in the web interface. See
.
•
Press
Cancel
to configure additional settings on the telephone. See
Configuring an identity on the telephone
.
Initial configuration is closed.
Configuring an identity on the telephone
1. Select
>
Settings
>
Identity
.
You access a list of unconfigured identities.
2. Open an unconfigured identity.
3. Then enter the data that is then listed, which differs depending on the
operating mode.
Note:
To enter numbers, either press and hold down the number keys
or use the screen keyboard.
PBX
VoIP provider
SIP
Username
The internal number
configured for the telephone
Example: 100
The username configured for
the account
Example: [email protected]
SIP
Registrar
The PBX's IP address
Example: 192.168.123.123
The VoIP provider's URL
Example: Providername.co.uk
Password
The associated password
The associated password