9
www.comfortel.com.au
OPERATING THE PEDICURE SPA
C A U T I O N
ALWAYS CHECk WATER TEMPERATURE BEFORE USE;
HOT WATER CAN BURN SkIN. WATER TEMPERATURE
SHOULD NOT EXCEED 41° C (105° F).
03
05
08
06
04
01
09
02
03
07
05
OPERATING THE PEDICURE SPA
1. Turn the drain open/close counter clockwise to close drain.
2. Using the diverter, select the hand held shower or water
inlet spout.
3. Using the mixer tap to add water to the basin, continue to
add water until the fill line is reached or water massage jets
are fully covered.
4. Start or stop the massage water jets by pressing the spa on/
off button.
ADDING WATER
5. Turn the drain open/close counter-clockwise to close drain.
6. Using the diverter select the hand held shower or water
inlet spout.
7. Using the mixer tap to add water to the basin. Continue to
add water until the fill line is reached or pipeless water Jet
are fully covered.
8. Start or stop the massage water jets by pressing the spa on/
off button.
REMOVE WATER FROM THE PEDICURE FOOT BATH
9. Ensure the water massage jets are turned off by pressing the
spa on/off button.
10. Open the drain by turning the drain open/close in a
clockwise direction until it stops.
PEDICURE ASSEMBLY COMPONENTS
1.
Mixer tap
2.
Spa On/Off
3.
Adjustable foot-rest
4.
Hand held shower
5.
Water inlet spout
6.
Pipeless Water Jet
7.
Drain open/close
8.
Drain plug
9.
Diverter - hand held
shower/water inlet
DIAGRAM I
Foot bath
DIAGRAM J
