GENERAL SAFETY
1. Read carefully and keep these instructions in a
safe place.
2. Use this product only for its intended function and
do not use attachments not recommended by the
manufacturer.
3. Do not use outdoors.
PRECAUTIONS
1. Do not use near water
2. Do not immerse the unit in water or use it in an area
where it could be splashed.
3. Always unplug the until before cleaning
4. Never leave the unit on when the container is
empty
5. Never leave the wax warmer while the wax is HOT.
ELECTRICAL APPLIANCES
1. DO NOT allow children to operate in this product.
2. Turn the power off and remove the plug when not in
use or when cleaning.
3. Do not let the power cord get damaged in any way.
4. Keep the power cord away from heat sources.
5. Do not use an extension cord unless the cord
complies with local electrical safety standards.
6. Periodically inspect the power cord for signs of
damage.
7. Do not operate any electrical item with a damaged
power cord.
OPERATION
1. Plug the wax warmer into the power point
2. Place the quantity of wax in the removable inner container
3. Press on/off switch and confirm power supply (indicated by light marked power)
4. Using push button arrows select desire temperature
5. Note: To protect your wax warmers please ensure the temperature control is not set on the highest settings for
more than 20 minutes. The high setting can be used for quick heating of wax but then the temperature setting
must be adjusted downwards before use.
6. When the desired temperature has been reached, the digital display of the temperature will stop flashing.
7. The temperature will need to be set at a level suitable for the wax to be used and allow 30minutes for wax to
reach desired temperature.
8. When finished using the wax warmer turn power OFF and unplug from the power point.
9. Wax is to be heated in the removable inner container. To heat different waxes, additional inner containers can be
purchased. Please contact your supplier.
10. It is not recommended that original plastic containers for wax be inserted into the wax warmer as they are not
suitable for direct heat.
11. Avoid re-dipping applicators. Single-use wooden spatula are recommended.
12. All types of wax both strip and hot wax should be kept undisturbed at a minimum temperature level of 70
°
-80
°
C
for a minimum of 15 minutes between clients.
IMPORTANT PLEASE READ THESE SAFETY INSTRUCTIONS
OPERATION
CAUTION: DO NOT USE IF FLEXIBLE CORD IS DAMAGED
ANY REPAIRS TO THIS UNIT MUST BE CONDUCTED BY A QUALIFIED ELECTRICIAN.
TO REPAIR FLEXIBLE CORD, USE TWO CORE SHEATHED CABLE ONLY.
