Comfort LY-EB103, Руководство пользователя

Страница: 13 / 41

which search for potential problems at a rate of 100 times per second. If
the VSI detects a problem either in its own circuits or in the power chair's
electrical system, it may decide to stop the power chair, depending on
the severity of the problem. The VSI is designed to maximize the user's
safety under all normal conditions. The table below identifies the
individual error codes. Error codes are displayed as a rapid flashing. If
you get one of these error codes, contact your Comfort Specialist.
Trouble Code
Diagnosis an Solution
The batteries need charging or there is a bad connection to
the batteries. Check the connections to the batteries. If the
connections are good, try charging the batteries.
The left motor has a bad connection. Check the left motor
connection.
The left motor has a short circuit to a battery connection.
Contact your Comfort Specialist.
The right motor has a bad connection. Check the right motor
connection.
The right motor has a short circuit to a battery connection.
Contact your Comfort Specialist.
The power chair is being inhibited by the battery charger.
Unplug the battery charger.
A joystick fault is indicated. Make sure that the joystick is in
the neutral
center position before turning on the controller.
A controller fault is indicated. Make sure that all connections
are secure.
The parking brakes have a bad connection. Check the
parking brake and motor connections. Make sure the
controller system connections are secure.
An excessive voltage has been applied to the controller.
This is usually caused by a poor battery connection. Check
the battery connections.
1
2
3
4
5
6
7
8
9
10
CONTROL PANEL AND OPERATION
VSI or Vr2 Controller