4
4
www.comfortzoneproducts.com
LIMITED WARRANTY
This unit is guaranteed to the original retail purchaser against
defects in quality or workmanship for a period of one year
from the date of original purchase. If this unit fails because of a
manufacturing defect within 30 days of purchase, return the unit,
with your receipt, to the retailer. After 30 days, but within the
warranty period, if the unit was purchased within the continental
United States, return it, freight prepaid, to World and Main for
repair or replacement. If the unit was purchased outside the
continental United States, return the unit to the place of purchase.
This warranty does not cover damage caused by misuse,
abuse, overheating or alteration. Repairs made by anyone other
than World and Main are not covered in this warranty. World
and Main will not be held liable for any losses due to neglectful
operation. All implied warranties, including the warranties of
merchantability and of fitness of purpose, if applicable, are
hereby limited in duration to the period of one year from the date
of original retail purchase. Some states do not allow limitations
on how long an implied warranty lasts, so the above limitations
may not apply to you. Incidental or consequential damages
arising from a breach of either express or implied warranties are
hereby disclaimed and excluded. Some states do not allow the
exclusion of limitation of incidental or consequential damages,
so this limitation or exclusion may not apply to you. Upon the
expiration of this warranty all such liability will terminate. No other
warranties are expressed or implied.
This warranty gives you specific legal rights, and you may also have
other rights which vary from state to state. No informal dispute
settlement mechanisms are available. This limited warranty is
given in lieu of all other warranties.
Manufactured for:
World and Main (Cranbury), LLC
324A Half Acre Rd.
Cranbury, NJ 08512 USA
800-221-6895
www.comfortzoneproducts.com
Rev. 04/16/2021
Slide cover to open
This product employs overload protection (fuse). A blown fuse
indicates an overload or short-circuit situation. If the fuse blows,
unplug the product from the outlet. Replace the fuse as per the
user servicing instructions (follow product marking for proper fuse
rating) and check the product. If the replacement fuse blows, a
short-circuit may be present and the product should be discarded
or returned to an authorized service facility for examination and/
or repair.
Fuse Replacement:
1. Grasp plug and remove from the receptacle or other outlet
device. Do not unplug by pulling on cord.
2. Open fuse cover by sliding open fuse access cover on top of
attachment plug towards blades (See Fig. 2).
3. Remove fuse carefully. Use a small tool to pry the end of the
fuse from holder cavity. Be careful not to break glass window.
4. Replace fuse. WARNING: Risk of fire. Replace fuse only with
identical 2.5 or 5.0 Amp, 125-volt fuse (3.6mm x 10mm).
Be sure fuse is properly seated within its cavity.
5. Close fuse cover by sliding it back to its original closed position.
Fig. 1
Fig. 2
Fig. 3
SAFETY FUSE
