3
3
CZBT4AS
www.comfortzoneproducts.com
Usage:
Fan Operation:
Always operate the fan in the upright position
following all instructions and recommendations listed in this
manual.
Fan Location:
Place the fan in the area of the room that will
provide proper fan cooling.
Fan Connection:
Plug Micro‑USB power cord into the back
of the fan base, and the other end into any USB port. Be sure
USB plug fits tightly in USB port. A loose connection may cause
overheating and damage to the USB plug or fan. NOTE: To
prevent overloading a USB port, do not plug the fan into a USB
port that is servicing other electrical needs.
Battery Usage:
Remove the battery cover on the fan base and insert four (4)
"AA" batteries (not included). Make sure to insert the batteries
following the polarity diagram located inside the battery
compartment. Please read and follow all Battery Warnings on
page 4.
Turning Fan On/Off:
Place fan on stable level surface.
Plug the Micro‑USB end of the cord into the back of the fan.
Then plug the USB end into any USB port. To start the fan, press
the switch on the back of the fan to "
1" for ON or "O" for OFF.
Unplug fan when not in use.
Adjustable Tilt:
Adjust the angle of the fan from Front to Back or Left to Right,
360 degrees.
ON/Off Button
Insert the Micro‑USB end of the USB Cord into the back of the
Fan base. Then plug the USB end into any USB port.
USB Cord:
Front to Back
Left to Right
Place the fan on a desktop or clip to a cabinet or shelf.
