3
3
CZ319WT
www.comfortzoneproducts.com
Usage:
Fan Operation:
Always operate the fan in the upright position
following all instructions and recommendations listed in this
manual.
Fan Location:
Place the fan in the area of the room that will
provide proper fan cooling. This fan can be placed in a window
to provide additional FRESH air from outside. In this location,
the fan can also be used to push inside air to the outside using
the EXHAUST position.
Fan Connection:
Plug fan directly into 120 volt A.C., 60 Hz
wall outlet. Be sure plug fits tightly in outlet. A loose connection
may cause overheating and damage to the plug or fan.
Note:
To prevent overloading a circuit, do not plug the fan into
a circuit that is servicing other electrical needs.
Turning Fan On/Off:
To start the fan, rotate Control Dial
from 0 position to desired fan speed (I or II). Rotate dial to 0 to
discontinue use. Unplug fan when not in use.
Fan Functions:
FRESH AIR Operation
draws fresh air in from the outside.
EXHAUST AIR Operation pulls inside air out of the room.
Instructions for Floor or Table Use:
Simple assembly is required to use this fan on a table or floor.
Locate 4 slots on the base of fan (See Fig. 1. Push fan leg into
slot to lock in place. Repeat this action on the other leg.
Removable Fabric Cover:
This fan has a unique fabric cover
included that helps keep out hot air, humidity and bugs when
the fan is not in use. Simply attach loops of cover to the hooks
around the fan openings (See Fig. 3). This cover can be used on
the inside surface while the fan is installed in your window for
intake or exhaust. Please be sure to remove cover before you
use the fan. Do not run the fan with cover on, damage can result.
Bug Screen attaches to back of fan:
Simply attach loops
of cover to the hooks around the fan openings (See Fig.4).
Note:
There could be a potential loss of airflow when the cover
is in place.
Fig. 2
Side Panel
Side Panel
Top Window Sash
Top Window Fan
Control Dial
Attach
Loops of Cover
to Hooks
Fig. 3
Installation For Double Hung Window:
• If space allows, screens can be left in place.
• Legs should not be installed when mounting in window.
• Your fan comes fully assembled and is ready for window
installation.
• This fan has been designed for a double hung window with
minimum openings of 23‑1/2" wide x 11‑1/8" high.
• Prior to installation, be sure the side panels are in the retracted
position.
1. Open window at least 12".
2. Identify the front and back sides of the fan.
For Fresh Air Operation
(draw in fresh air from the outside),
position the fan so the front side faces you. See silkscreen
indicator under control dial "This Side ‑ Fresh Air In".
For Exhaust Air Operation
(pulls inside air out of the room),
position the fan so the back side faces you. See silkscreen
indicator under control dial "This Side ‑ Exhaust Out".
3. Place one hand under the fan and grasp the recessed handle
around the Control Dial with your other hand. With power cord
aligned in its slot and coming inside the house, position the
bottom (lower edge) of the fan over the sill cap of the window
while still holding the recessed handle. Use your free hand
to lower the window sash down, making firm contact with
the top of the fan (See Fig. 2). Secure window sash in down
position tight against the fan top. Note: It is the customers
responsibility to be sure the fan is secure in the window.
4. Pull out each side panel until the space on the sides of the fan
are fully blocked, making sure that the power cord is hanging
inside the room. The side panels can be retracted back into
the fan by pushing them inwards.
m
CAUTION:
Fan will not stop a child from falling out of the
window. Keep children away from open windows.
Fig. 4
Fig. 1
2
1
4
3
