Comfort Smart ND-18D2S Скачать руководство пользователя страница 2

2   

   

 

 

 

 

 

 
 

1.  Read all instructions before using this appliance. 

 

2.  This appliance is hot when in use. To avoid burns, do not 

let bare skin touch hot surfaces. If provided, use handles 
when moving this appliance. Keep combustible materials, 
such as furniture, pillows, bedding, papers, clothes and 
curtains at least 3 feet (0.9 m) from the front of this 
appliance.  

WARNING: In order to avoid overheating, 

do not cover the heater. It can

not 

be used in a closet 

or wardrobe. 

 

3.  CAUTION: Whenever the heater is left operating and 

unattended, extreme caution is necessary if children are 
nearby.

 

4.  The appliance is not to be used by children or persons 

with reduced physical, sensory or mental capabilities, or 
lack of experience and knowledge, unless they have 
been given supervision or instruction.

 

5.  Children should be supervised and not allowed to play with 

the appliance.

 

6.  If possible, always unplug this appliance when not in use.

 

7.  Do not operate any heater with a damaged cord or plug or 

after the appliance malfunctions, or if it has been dropped 
or damaged in any manner.

 

8.  If the supply cord is damaged, it must be replaced by the 

manufacturer,  its  service  agent  or  similarly  qualified 
persons in order to avoid a hazard.

 

9.  Any repairs to this fireplace should be carried out by a 

qualified service person.

 

10.  Under no circumstance should this fireplace be modified. 

Parts having to be removed for servicing must be 
replaced prior to operating this fireplace again.

 

11.  Do not use outdoors.

 

12.  This heater is not intended for use in bathrooms, laundry 

areas and similar indoor locations where high levels of 
humidity or moisture may be present. Never locate this 
appliance where it may fall into a bathtub or other water 
container.

 

13.  Do not use this fireplace if any part of it has been 

underwater. 

14.  Do not run cord under carpeting. Do not cover cord with 

throw rugs, runners or the like. Arrange cord away from 
traffic areas and where it will not be tripped over.

 

15.  To disconnect this appliance, turn controls to the off 

position, then remove plug from outlet.

 

16.  Connect to properly grounded outlets only.

 

17.  This appliance, when installed, must be electrically 

grounded in accordance with local codes or, in the absence 
of local codes, with the current CSA C22.1Canadian 
Electrical Code or for U.S.A. installations, local codes and 
the National Electrical Code, ANSI/NFPA NO.70. 

 
 
 
 
 
 
18.  There is a thermostat limiter inside the heater. When the 

inner temperature overheats or abnormal heating occurs, the 
thermostat protective device will cut off the power supply to 
avoid damage to the fireplace or risk of fire. 

19.  The heater must not be located immediately below a socket-

outlet.

 

20.  Do not insert or allow foreign objects to enter any ventilation 

or exhaust opening as this may cause an electric shock, fire, 
or damage the appliance.

 

21.  To prevent a possible fire, do not block air intakes or exhaust 

in any manner. Do not use on soft surfaces, like a bed, 
where opening may become blocked.

 

22.  This appliance has hot and arcing or sparking parts inside. 

Do not use it in areas where gasoline, paint or flammable 
liquids are used or stored. This fireplace should not be used 
as a drying rack for clothing. Christmas stockings or 
decorations should not be hung in the area of it.

 

23.  Use this appliance only as described in the manual. Any 

other use not recommended by the manufacturer may cause 
fire, electric shock or injury to persons.

 

24.  Avoid  the  use  of  an  extension  cord  because  the  extension 

cord  may  overheat  and  cause  risk  of  fire.  However,  if  you 
have to use an extension cord, the cord must be No.14 AWG 
minimum  size  and  rated  not  less  than  1875  Watts.  The 
extension  cord  must  be  a  three  wire  cord  with  grounding 
type plug and cord connection. The extension cord shall not 
be more than 20 feet (6 m) in length.

 

25.  See directions in Figure 1. This heater is for use with a 

standard 120 Volt outlet. The cord has a plug as shown in 
Figure 1. See Figure 1 for grounding instructions. An adapter 
as shown at C is available for connecting three-blade 
grounding type plugs to two-slot receptacles. The green 
grounding plug extending from the adapter must be 
connected to a permanent ground such as a properly 
grounded outlet box. The adapter should not be used if a 
three-slot grounded receptacle is available.

 

 

 

IMPORTANT SAFETY INFORMATION 

When using electrical appliances, in order to reduce the risk of fire, electrical shock, and injury to persons, basic 

precautions should always be followed, including the following: 

   

Содержание ND-18D2S









Отзывы: