Getting Started
Remove the appliance from the box.
Remove any packaging from the product.
Place the packaging inside the box and either store or dispose of safely.
Contents of Carton
Heater.
Wall fixing bracket.
Fixing screws and wall plugs.
Remote control.
1 Instruction Manual.
Helpful Advice before Fitting
Please retain all packaging until you have checked and counted all the parts and the contents
of the fixing pack against the parts list.
The fixing pack contains small items which should be kept away from young children.
We suggest that you open the fixing pack and place all the contents into a container, therefore
reducing the risk of losing any small pieces.
Installation
Do not connect the appliance until properly fixed to the wall and the instructions is read fully.
The minimum distances must be observed.
For installation of the appliance, care must be taken not to damage concealed cables.
Please be careful while drilling the holes.
This appliance is designed to be permanently fixed to a wall at a minimum height of
300mm.The wall bracket must be fitted horizontally and the cable routed to the bottom right
of the heater.
A height of 600mm from bottom of heater to floor is recommended for optimum viewing of
fuel bed (see Fig.2 for recommend fixing dimensions)
Keep top of heater at least 1000mm away from ceiling or other objects for optimum heat
ventilation.
For optimum viewing, mark the top four screws fixing positions on wall in accordance with
the recommend fixing dimensions- see Fig.2.Drill holes with a six drill bit.
Fix the wall bracket using that the plug and screws provided .
Carefully lift the heater up ensuring that the top rear ledge of heater engages the wall bracket
(see Fig.2 in circle) and is sitting centrally.
Gently bring the heater level with the wall.
Mark the bottom holes position-see Fig.3, remove the heater ensuring that the bottom fixing
bracket is rotated up.
3