WARNING
Fan accessory must be grounded. Fan comes
with a three-prong, grounding plug as shown
in Figure 1. The plug is your protection against
electrical shock. Plug it into a standard,
three-hole, grounded, outlet. If cord needs
replacing, use only a cord with a three-prong,
grounding plug.
Instructions For Installing GA3450T
Thermostat Blower Accessory
Grounding Plug
Figure 1 - Grounding Plug
Grounded Outlet
Removing Upper Louver Assembly
To install the blower accessory, you must first remove the upper louver assembly.
Figure 2 - Removing Upper Louver Assembly
Continued
Cord length from switch plate assembly to plug
is six feet. Make sure grounded outlet is an
appropriate distance from unit.
NOTICE
GA3450T for use on CGCF26T Series Compact Fireplace
Upper Louver
Assembly
Blower Bracket
Mounting Holes
CGCF26T Series
1. Lift screen off heater.
2. Remove 2 screws from louver assembly (see Figure 2). Save these screws.
3. Pull louver assembly straight out from the cabinet. Be careful not to scratch the paint. Set louver assembly and
screws aside.
WARNING
Failure to connect all wires as indicated may
cause electrical shock or personal injury.
If any of these pieces are missing or damaged, contact the
dealer where you purchased this kit or DESA Interna-
tional at 1-800-972-7879 for referral information.
Hardware kit contains
2 Plastic snap bushings
6 #10 screws
1 Plug button
Carton Contents
Description
Part Number
Bracket
103966-01
Thermodisc
103972-01
Blower
103283-01
Wire Harness
103968-01
Power Cord
104015-01
AUTO/OFF/ON switch
099998-01
Mounting Hardware kit
098418-08
