8
Receiver DE10
Settings
As the DE10 does not have a display/menu, the unit’s functions are con-
trolled by means of the pairing button. The current function is shown by
the function indicator.
In addition to the pairing functions (see section Pairing), three other
functions can be activated.
To do this, press the pairing button and hold it immediately after starting
up the unit for 2 seconds.
A selected function can always be cancelled by switching of the DE10
and starting it up again.
Change channel
When the pairing button is pressed for five seconds, the function indica-
tor shows a constant green light. Now release the pairing button, the
function Change channel is activated.
10 channels can be selected (see chapter
Radio Range and Channels
). To
choose a channel, press the pairing button briefly the number of times
corresponding to the desired channel (1x for channel 1, 2x for channel 2
etc.)
After 2 seconds, the selected channel is shown by the same number of
green flashes of the function indicator.
Change
code
Change
code
Factory
reset
0 sec
5 sec
10 sec
15 sec
20 sec