Remote Controller Manual -
DVC/DVH 09/12/18/24 Series
9
9
2
1
Timer oper ation
1. Press the TIMER ON button. The remote
controller shows TIMER ON, the last Auto-on
setting time and the signal "H" will be shown on
the LCD display area. Now it is ready to reset
the Auto-on time to START the operation.
2. Push the TIMER ON button again to set desired
Auto-on time. Each time you press the button,
the time increases by half an hour between 0
and 10 hours and by one hour between 10 and
24 hours.
3. After setting the TIMER ON ,there will be a one
second delay before the remote controller
transmits the signal to the air conditioner. Then,
after approximately another 2 seconds, the
signal "h" will disappear and the set temperature
will re-appear on the LCD display window.
Press
ing
the TIMER ON button
will
set the auto-
on time of the unit. Press the TIMER OFF
button
to
set the auto-off time of the unit.
To set the Auto-on time.
To set the Auto-off time.
1. Press the TIMER OFF button. The remote
controller shows TIMER OFF, the last Auto-off
setting time and the signal "H" will be shown on
the LCD display area. Now it is ready to reset
the Auto-off time to stop the operation.
2. Push the TIMER OFF button again to set
desired Auto-off time. Each time you press the
button, the time increases by half an hour
between 0 and 10 hours and by one hour
between 10 and 24 hours.
3. After setting the TIMER OFF ,there will be a
one second delay before the remote controller
transmits the signal to the air conditioner. Then,
after approximately another 2 seconds, the
signal "H " will disappear and the set temperature
will re-appear on the LCD display window.
M O D E
FA N
T E M P
O N / O F F
T I M E R
ON
T I M E R
OF F
9
SILENCE
FP
L E D FO L L O W
M E
T U R B O SE L F
C L E A N
S W I N G D I R E C T
S L E E P
VMH 09/12/18/24 SU/30 SD Remote Controller
Heat Controller
Remote Controller Manual -
DVC/DVH 09/12/18/24 Series
