CUWIN V Series
CVW-070BR/CWV-070WR/CWV-102BR Hardware Manual
COMFILE Technology, Inc. www.comfiletech.com
•
page
4
Name
Description
A Power
input
DC-Jack
φ
2.5 DC Power Input Jack for adaptor
B
Power terminal
Power terminal for cables
C
Power S/W
Power input ON/OFF
D
COM3
COM3 (RS232C / Female Type D-SUB 9PIN)
E
COM2
COM2 (RS232C / Female Type D-SUB 9PIN)
F
COM1_RS232C
COM1_RS232C (RS232C / Female Type D-SUB 9PIN)
G
COM1 Mode Switch
DIP Switch for selecting COM1 mode
H
COM1_RS485
COM1_RS485 Port (RS485)
I
Ethernet
10Base-T Ethernet Port (RJ-45)
J
USB_HOST
USB Host Port (USB A Type Connector)
K
USB_DEVICE
USB OTG Port (USB mini AB Type Connector)
L
SD Card Connector
SD Card slot
M Audio
Out
Stereo Audio Output Port (
φ
3.5)
N
Boot Mode S/W
DIP Switch for selecting Boot mode
3. Bracket Installation
Mounting screws and brackets are provided with each CUWIN. They are designed to clamp the
CUWIN bezel against a front panel, with the rear portion of the device extending through a panel
cutout.
After assembling the brackets as shown below, insert the side hooks into the appropriate mounting
holes on the top and bottom of the device.
Then tighten the screws enough to hold the CUWIN securely against the front panel. Do not over
tighten, or you will risk damaging the CUWIN.
