Setup and Operation
1. Place the massage on the suitable support.
2. Connect the adapter cable to the corresponding cable on the
mat.
3. Plug the home adapter into an outlet between 100-240V.
4. Turn on the device using the controller
(Refer to below remote controller instruction.)
5. When finished place the controller in the pouch at the side of the
mat.
3
LEG
BACK
HEAT
MODE
ON/OFF
INTENSITY
L
M
H
LUMBAR
SHOULDER
HEAT:
Press to activate heat,
the heat can be used
independently
MODE:
Press to change the
MODE between M1
to M5.
MODE indicators
Five Preprogrammed
massage modes
ON/OFF:
Press to turn the
massage mat on or off.
INTENSITY:
Press to choose Low,
Medium, High intensity of
vibration.
Massage Regions:
Each massage regions
may be turned off or on
as desired by press the
button for any
combination of regions
and while any of the five
MODES are active.
NOTE: the “LEG” button
controls the leg and feet
regions.
Intensity indicators:
Low, Medium, High
