Comfee CVP30W7AST, Руководство пользователя

Страница: 10 / 16

Assemble the Lower Chimney Cover :
•
•
Slide the Lower Decorative Chimney trim (2.1)
over the fan body.
Ensure that the Decorative trim is pressed
down to line up the lower mounting holes (A)
Slightly lift the Upper Decorative Chimney
cover
Insert 2 short sheet metal screws (12) in the
lower holes
• Place Chimney mounting bracket (21) at the top
of the Lower Decorative Chimney (2.1), and
insert 2 short sheet metal screws (12) into the
outer most holes on the bracket at location B
Pre-Assemble
the
Upper Chimney Cover
:
•
Remove the protective foil from the Upper
Decorative Chimney (2.2)
•
Slide the Upper Decorative Chimney trim (2.2)
into the Lower Decorative Chimney trim
Hang and Mount the Vent Hood
:
• Hang the vent hood onto fixing bracket 20
• Level the hood, and insert 2 long screws (10 )
into bracket 21 at level B
• Insert 2 long screws (10) into the hood at level A
Install Duct and Insert Plug :
• Install 6" duct over the flange on the fan body
•
Use 2" wide metal tape to make an air tight
seal between the duct and the fan body
• Install a clamp to secure the ductwork
securely
• Remove Carbon Filters if installed
• Insert the plug into a properly grounded outlet
IMPORTANT
• The vent hood should be lifted and
installed by 2 people to prevent injuries
and potential damage
WARNING
Electrical Shock Hazard
• This unit must be grounded. This
appliance is equipped with a cord
having a grounding wire with a
grounding plug. The plug must be
plugged into an outlet that is
properly installed and grounded.
• Do not use an extension cord. If the
power supply cord is too short,
have a qualified electrician install
an outlet near the appliance.
Right
Wrong
2
.
1
12
•
•
8