Comfee CDC17P0ABB, Инструкция по эксплуатации

Страница: 24 / 32

2.
simultaneously to drain the water tank.
3. Turn off the water supply and disconnect the water inlet pipe from the back of
the dishwasher.
4.
Drain water from the inlet pipe and dishwasher (use a pan to catch the water).
5. Disconnect drain hose,and drain water from hose and back of dishwasher (place
7. Remove the filter at the bottom of the tub and use a sponge to soak up water
in the sump.
Protect against freezing
Protect the dish washer from freezing temperatures.If the dishwasher will experience
freezing temperature please flow the below procedure:
NOTE
Damage due to freezing is not be covered under the warranty.
Cleaning The Spray Arms
The spray arms can be easily removed for periodic cleaning of the nozzles to remove
possible clogging. Wash them under running water and carefully replace them in
their seats, checking that their rotary movement is in no way impeded.
Grasp the middle of the spray arm, pull it upwards to remove it. Wash the arms
under a jet of running water and replace it carefully to its seat. After reassembly,
check that the spray arms rotate freely and are snapped in securely.
-24-
1. In standby mode,press and hold DELAY AUTO OPEN button for 3 seconds
Unplug electrical power to the dishwasher.
6.
a catch pan under connection before disconnecting to catch water).
Reconnect the water inlet pipe and drain hose to the back of the dishwasher.