Initial Connection
Use a wireless device to connect to the device with the SSID
of COMFAST_XXXX_2G (XXXX is the last two digits of the
MAC address). After the connection is complete, open the
browser and enter the IP address 192.168.10.1, enter the login
page, and enter the default password admin to log in to the
web page. After logging in, the page jumps to the relay mode
scanning page. After the scan is over, the page refreshes to
select the device list.
2.1
Click the device that needs to be extended, the information bar
at the bottom of the page will match the information of the
selected device, fill in the corresponding password and "2.4G
SSID" information, click "Save Setting", wait for the page
countdown to end, and then complete the relay mode setting.
Use the wireless device to reconnect the "2.4G SSID" just
filled in to connect to the device
。
2.2
Select
RSSI
Connected to:
Save Setting
Re Scan
LOGIN
Scanning, please wati!
