Comet XRC-3023-WW, Руководство пользователя

Страница: 44 / 52

44
•
Collect any coolant that emerges using an absorbent cloth.
•
Check coolant level and top up, if necessary, see "Adding coolant".
•
Start up the unit, see "Putting the unit into operation".
The filter strainer is now clean.
Figure 14: Mounting position of the filter strainer
(1) Screw cap of the filter strainer
9.12. Cleaning the casing
NOTE
Risk of damage by use of improper cleansing material!
When using aggressive or abrasive cleaning agents corrosion damage may occur as result of a
damaged paint film.

For cleaning the unit body only use mild cleaning agents (e.g. dish washing detergents).

Use clean and lint less cloth for cleaning.
Regularly remove dirt from the casing of the unit to prevent corrosion damage. Pay attention that all
plates at the unit are always clean and legible.
10. Repair
10.1. Safety
Ensure to adhere to safety regulations as detailed in chapter "Safety".
10.2. Repair procedures
In case of malfunctioning during the warranty period the unit must be sent to the COMET service de-
partment for repair (see "Contact information" or the COMET services website under
http://www.comet-xray.com/Service/Contact-Form ).
When warranty has expired, no restrictions from the side of COMET exist with respect to repair work
carried out by the customer, as long as warranty and warranty conditions remain untouched. In any
case only expert staff is authorized for doing repair work.
When doing repair work on the unit always be aware of the terms of warranty as defined in
chapter "Terms of warranty".