Comet XRC-3023-WA Скачать руководство пользователя страница 40 | Manualshive

Страница: 40 / 52

Comet XRC-3023-WA Скачать руководство пользователя страница 40

40

Figure 12: Cover for electrical connections

(1) Fastening screws

9.10. Cleaning the filter strainer

WARNING

WARNING

Risk of burning and/or scalding due to possibly hot coolant.

Coolant can reach high temperatures during operation and cause burns or scalding
in the case of contact.



Check whether the coolant is hot before handling it. If necessary, let it cool

down to the ambient temperature, that there is no more risk of burns or scald-
ing.

NOTE

Risk of damage to the pump, if the unit is operated with a fully closed ball valve.



Never start the unit, when the ball valve is closed.

Cleaning the filter strainer

Requirements



Unit prepared for maintenance, see "Preparing the unit for maintenance"



Coolant cooled down to the ambient temperature.



Unit cover removed, see "Removing and mounting the unit cover"

Tools and material required

–

Spanner (size 24)

–

Absorbent cloth

Procedure



Close the ball valve.



Place an absorbent cloth below the filter strainer to collect the coolant



Unscrew the cap of the filter strainer using the spanner (size 24).

«
...
38
39
40
41
42
...
»

Содержание XRC-3023-WA





















































Отзывы:

Нет отзывов