IE-SNC-T33(4)19+T73(4)11-09
15
Technical support and service
Technical support and service is provided by distributor. For contact see warranty certificate.
Appendix A
Connection of transmitters with RS485 output to the PC
The
ELO E214
converter is an optional accessory for connection of transmitter with RS485
interface to the PC via USB port. Link RS485 is connected across pin 9 A(+) and pin 8 B(-). The
pull up, pull down and termination resistors are part of the transmitter. These internal resistors can
be connected to the bus by connecting the corresponding pins of CANON connector (for more
information see the operation manual for ELO E214).
The
ELO E06D
converter is an optional accessory for connection of transmitter with
RS485 interface to the PC via serial port RS232. Connector marked RS232 connect directly to the
PC. Power voltage +6V DC from an external acdc adapter connect to pin 9 of connector marked
RS485, 0V connect to pin 5 and link RS485 connect across pin 3 A(+) and pin 4 B(-). Time out
setting is performed by connecting the corresponding pins of connector marked RS485 (for more
information see the operation manual for ELO E06D).
Appendix B
