Drive-on Portable Mast Mount
MCB-III
MCB-III is drive-on mast support base plate. Do not place any other things on the base plate.
MCB-III requires three guy wires anchored 120 degree apart.
Do not use the unit in strong winds.
Make sure to secure the unit with two clamp bolts.
Before inser
ti
ng the mast, make sure to drive the vehicle on to the base plate.
NOT RESPONSIBLE FOR ANY DAMAGES TO VEHICLES.
●
Easy mou
nti
ng with NO tools.
●
Fold-over feature makes mou
nti
ng antennas easy and fast.
●
Hot-dip galvanizing for corrosion control
1. Assemble the unit with the bolts provided, following to the assembly diagram.
2. Select a
fl
at place.
3. Drive slowly the vehicle on to the base plate.
4. Make sure the unit securely
fi
xed by the vehicle. Then, insert the mast into the socket.
★
If you insert the mast with the antenna, remove either one of two clamp bolts to
ti
lt the socket horizontally. Then, insert the mast
with the antenna into the socket.
5.
Secure the unit in the ver
ti
cal posi
ti
on with the clamp bolts. Make sure to
ti
ghten the wing nut.
6. Pull the guy gently to
fi
x the mast in the ve
rti
cal posi
ti
on.
Collapsed back and forth by
removing clamp bolts
Speci
fi
ca
ti
on
Mast Diameter : 34
φ
–
50φ
Max Antenna Weight : approx 10kg, but depending on your mast.
Weight : approx.4.3kg
Dimension : 165x535x400mm
【
Maintenance
】
☆
Stop the use of this antenna immediately if you see the slightest trouble, and ask the local shop you purchased this product.
Make sure that the product works normally before opera
ti
ng.
【
Maintenance/A
ft
er-Sales Service
】
Always check the unit before using. Do not use it if you see the slightest trouble. We provide the replacement parts for the damages by
uninten
ti
onal accidents or for deteriora
ti
on with long-term use. Please ask the local shop you purchased this product. Contact the shop
you purchased this product.
Copyright (C) 2012 COMET CO.,LTD. All Rights Reserved.
Printed in JAPAN. 2nd Version
COMET CO.,LTD.
4-18-2, Tsuji, Minami-ku, Saitama-shi, Saitama-Pref, 336-0026, JAPAN
TEL : 81-48-839-3131 / FAX : 81-48-839-3136
URL : h
tt
p://www.comet-ant.co.jp/englis
h
◆
Speci
fi
ca
ti
ons or appearance is subject to change without n
oti
ce.
Thank you for your purchasing our product.
This product is made under the stringent quality control. Should there be any breakage in
transit, please do not hesitate to contact the shop you purchased this product.
For your safety, read this manual carefully for proper handling and opera
ti
on before using.
Instruction Manual
PRECAUSTIONS
Features
How to use
Your Pole (or mast)
Assembly Diagram
Protective Plate
(Remove it when inser
ti
ng
φ
45 or more pipe.)
Insert this into the socket, and put
the axial bolt through this hole.
Clamp Bolt M8x30
Clamp Bolt M8x80
Wing Nut
Axial Bolt M8x80
Socket
Side Plate
Base Plate
Wheel-lock pipe