17
19. MEMORY FUNCTION
22. OTHER SPECIFICATIONS
(1) In standby state , if the set clock digital tube displays current time, the icon "
:
" would
flash; otherwise, it shows " 0:00
".
(2) In setting function state, the screen displays corresponding setting.
(3) In working or pause state, the screen displays surplus cooking time.
When the cooking is over, the buzzer will sound 5 "beep" to alert user the cooking is finished.
21. COOKING END REMINDING FUNCTION
20. INQUIRING FUNCTION
(1) In cooking state, press "
CLOCK/KITCHEN TIMER
", the screen will display clock for three
seconds.
(2) In the microwave cooking state, press "
POWER
" to inquire microwave power level, and
the current microwave power will be displayed. After three seconds, the oven will turn back
to the previous state. In multi-stage state, the inquiring way can be done by the
same way as above.
(1) Press "
0/MEMORY
" to choose memory 1-3 procedure. The screen will display 1,2,3.
(2) If the procedure has been set, press "
START/ +30 SEC.
" to use it. If not, continue to
set the procedure. Only one or two stages can be set.
(3) After finishing the setting, press "
START/ +30 SEC.
" once to save the procedure and
turn back to the waiting states.If press "
START/ +30 SEC.
" again,it will start cooking.
Example: to set the following procedure as the second memory, that is memory 2.
to cook the food with 80% microwave power for 3 minutes and 20 seconds.
The steps are as follow:
a. In waiting states, press
"0/MEMORY
" twice,stop pressing until the screen displays "2".
b.Press "
TIME COOK
" once,then press "3","2","0" in order.
c. Press "
POWER
" once,"PL10" display,then press "8" and "PL8" displays.
d. Press "
START/ +30 SEC.
" to save the setting. Buzzer sounds once then turn back to
waiting states. If you press "
START/+30SEC.
" again, the procedure will be saved as the
memory 2 and operated.
e. If the electricity is not cut off, the procedure will be saved all the time. If it is, the
procedure need to reset.
f. If you want to run the saved procedure, in waiting state, press "
0/MEMORY
" twice,
screen displays "2", then press "
START/+30SEC.
" to run.