Comet System Web Sensor T5540, Руководство пользователя

Страница: 7 / 46

IE-SNC-T5(6)5xx-08
7
Getting started
Here you can find information necessary to put newly purchased equipment to
operation. This procedure is only informative.
What is needed for operation
To install the unit you need to the following equipment. Before installation check if it’s
available.

Web Sensor Tx5xx device

power supply adapter 9 - 30V/200mA

RJ45 LAN connection with appropriate cable

free IP address in your network
Mounting the device

check if the equipment from previous chapter is available

install the latest version of TSensor software. This software is used to all device
settings.

TSensor software can be free downloaded from the manufacturer’s website.
Software can be also supplied on CD. Device configuration can be made using
web interface. For web configuration is not TSesnor software necessary.

contact your network administrator to obtain following information for the
connection to the network:
IP address: _____._____._____._____
Default gateway: _____._____._____._____
DNS serer IP: _____._____._____._____
Subnet mask: _____._____._____._____

check if there is no IP address conflict when you connect the device into
network for the first time. The device has from factory set the IP address to
Chapter
2