IE-WFS-KAL-WiFi-01
11
Saving of the new Adjustment
Temperature Adjustment (W0710, W0711, W0741,
W3745)
Input adjustment can be performed using
Service
– Device adjustment
menu
item, however,
we do not recommend this way.
The device inputs for
Pt1000 RTD sensors are very stable. From this reason is not recommended
to change calibration constants if the probe does not measure accurately.
There are two ways to improve measurement accuracy. It can be set
correction to cable length
or
user
calibration
can be used.
At first step enter
Device settings
and show
Channels
bookmark:
In case of probes with longer cables are used, it should be set
correction to
cable length
as shown at image below:
