●Compact size, heavy duty magnet mount.
●With a conversion connector included, it is compatible with a variety of radios.
●Easy routing through small holes, under carpet, etc...
●Wideband & High-gain antenna.
MODEL
Compact size Magnetic mount antenna w/ coax. cable
Instruction Manual
● To remove the magnet mount from the vehicle, do not slide the magnet mount to avoid scratching.
Do not pull on the coax cable.
● Do not place any foreign obstacles such as a vinyl sheet or a cloth between the magnet mount and
your vehicle. This may cause magnet to fall off while your driving.
● Drive carefully not to hit any obstacles such as trees with the antenna.
● Installing of this mobile mount permanently may discolor your vehicle's paint. Remove the
magnet mount from the vehicle when not in use.
COMET CO., LTD.
4-18-2, Tsuji, Minami-ku, Saitama-shi, Saitama-Pref, 336-0026, JAPAN
TEL : 81-48-839-3132 (Customer Service) / FAX : 81-48-839-3136
URL : https://www.comet-ant.co.jp/ (Japanese Site)
Copyright (C) 2021 COMET CO.,LTD. All Rights Reserved.
◆
Specifications or appearance is subject to change without notice.
Printed in JAPAN. 1st edition. Mar 2021.
Specifications
◆
Frequency : 144-148 / 430-450 MHz
[Wideband reception : 100-170MHz, 350-470MHz]
◆
Impedance : 50Ω
◆
Gain : 1.7dBi (2m-band), 4.15dBi (70cm-band)
◆
Max. Power : 80W (FM)
◆
Cable Length : approx. 5m
◆
Connector : FME-J
◆
Adapter :
◆
Color : Black
Thank you for choosing our product.
For your safety :
Read this manual carefully for proper handling and operation before using.
Keep this manual in a safe place for future reference.
Coax.cable : RG-58A/U
F
eatures
Note
How to use
Φ77
(46)
(493)
MA-721
2m/70cm-band
Although the antenna can be used with almost no adjustment while it is installed, VSWR changes
slightly depending on the size of the body roof and installation position.
Sorry to trouble you, but please start operation after verifying the position where VSWR improves as
much as possible.
Check
VSWR
1. Turn and insert the element into the threaded part of the power feed where the coaxial cable is
connected. From the point where the element lightly touches the power feeder, retighten the element
by about +1/8 turn to secure it. Be careful not to over-tighten, as this may cause damage.
2. Clean the periphery of the body roof surface to be installed. Leaving dust and dirt will cause
scratches.
When installing, with the antenna diagonally tilted, bring the edge of the main body magnet face into
gentle contact with the installation position, and wake up the antenna as it is.
3. There is a difference in the VSWR characteristics between the center of the roof and the end of the
roof, so please locate and install a position with good VSWR characteristics.
4. Please install as much as possible on the surface where the antenna stands vertically.
5. As for the removal method, grasp the vicinity of the base of the antenna element and tilt the
antenna obliquely.
(5m)
!
FME-J
Conversion adapters are included in the kit.
Please use the one that matches the
connector of the radio you will be using.
FME-P / SMA-P
FME-P / PL-259(M-P)
Bottom : Ferrite ring core
Connect
