COMENDA RF321, Инструкция по эксплуатации, Страница: 5 / 15

INSTRUCTIONS FOR THE USER
5
OPERATION AND USE
1. Before washing make sure that:
•
the wall-mounted on/off switch is switched on;
•
the water tap is open;
•
water is present in the distribution network;
•
the pump protection filters are installed in their respective positions;
•
the overflow in inserted;
•
all rotating parts are free;
•
the rinse aid dispenser is full;
•
make sure that dishware is in good conditions as it may cause cleaning
difficulty and haven bacteria.
2. Press switch "Q1" to position "RED" to enable the automatic wash tank
filling and the consequent triggering of the heating element.
3. As soon as visual indicator "H2" is ON; pour about 30 gr. of detergent
directly into the tank, paying attention to distribute it uniformly on the filters,
the quantity being according to supplier's instructions. Add 15 gr. every 7
cycles to achieve a concentration of 1,5 gr./lt. In order to respect our
environment, use only the correct amount of detergent.
When using chlorinated detergent, it is suggested to use an automatic
dispenser; otherwise, brownish spots might appear on the surfaces due to
chlorine reactions. Detergent should always be placed near the pump filter.
4. Then, introduce the glasses or the cups to wash, after having removed the
solid waste and having placed them into the proper racks. The cups and the
glasses should be turned upside down, while the cutlery should be put
vertically into the proper container, and the same applies to dishware.
5. Close the door and press the "S3" button to start cycle, the end of which
will be indicated by the switching off of the "H3" lamp.
ATTENTION: Machine in conformity with the existing hygienic
standards, guaranteeing a final rinse at 85°C. Wash cycle automatically
lengthened if final rinse temperature is not reached.When this auto-cycle
intervenes and the cycle is pro-longed, after 8 minutes the "H3"
indicator flashes to indicate this intervention and the cycle continues
(water supply temperature is likely to be the problem, otherwise contact
an assistance center since it is a rinse water heating intervention.). Turn
off the machine to remove this alarm.