COMENDA AQUA+VS, Руководство пользователя, Страница: 42 / 112

- 14 -
4.5 ELECTRONIC BOARD FUNCTIONING
SCHEDA DI CONTROLLO, FUNZIONE TASTI
ENTER key. It allows you to access to the sub-pages and programming.
UP key. It allows you to scroll through menu and the increase of the selected parameter.
DOWN key. It allows you to scroll through the menu and the decrease of the selected
p
parameter
ON--OFF key. It allows you to put in standby mode the electronic board by turning off the
d
display.
4.5.1 Normal functioning
When the board is in normal functioning mode, the name of the reseller is displayed.
When the tap is opened, the machine starts producing permeate water; pushing the
ENTER key, the conductivity is displayed.
When the tap is closed, the board returns in normal mode.
Main water pressure failure
When tap is opened, if low pressure failure occurs, the display shows “Alarm P. min”
and the board makes a beep.
To restart the machine, turn OFF and ON with the key.
Leakage
If water leakage alarm occurs, the machine stops and makes continuous beep
displaying “Alarm Leakage”.
To restart the machine, turn OFF and ON with the key.
Filter change
About 2 hours before the filters are exhausted, the electronic board will signal to
change the filters at operating start.
Once replaced the filters, make reset as described in § 4.5.3.
4.5.2 Display pages
When the board is in normal functioning mode, the name of the reseller is displayed.
AQUA+VS
uS/cm
0050
AQUA+VS
Sost.
Filter
Alarm
P. min
Alarm
Leakage