Comelit WD01A, Руководство пользователя

Страница: 3 / 4

WATER DETECTOR
ART. WD01A
Specifications:
•
Relay output: NC / NO selectable, 1A-120V AC / 1A-24V DC (not inductive)
•
External terminal length: 35mm max
•
Case: ABS, white
•
Length for additional remote sensors: 100m max
•
Additional remote sensors: 8 max
•
Power supply: 12V DC
•
Current absorption: 20mA max (15mA in stand by)
•
Dimensions (W x H x D): 60 x 90 × 25 mm
Installation:
•
Open the cover of the water detector
•
Fix the water detector on the wall near the floor as much as possible
•
Loosen the screws that lock the terminals and adjust them at the height you want
•
Tighten the screws to lock the terminals
•
Make the electrical connections
•
Close the cover of the detector
Note:
to connect the remote sensors, we suggest using cable of optimal (two conductors of 0.5 mm
2
) to avoid
that the cable installed in humid atmosphere can create leakage damages to the operation of the device.
Relay polarity setting:
Ideal for water level detector, tank filling check,
pipes breaking, underwater pump troubles, non
inflammables conductive liquids.
J1
J1
NO (Normally Open)
NC (Normally Closed)