25
147
1,2,5,8
Self activation time: 60 sec
(default)
149
1,3,5,8
Self activation time: 30 sec
237
1,3,4,6,7.8
Self activation: enabled
(default)
238
2,3,4,6,7.8
Self activation: disabled
154
2,4,5,8
System busy signalling time: 10 sec
(default)
155
1,2,4,5,8
System busy signalling time: 300 sec
239
1,2,3,4,6,7,8
Confirmation tone on user call = enabled
(default)
240
5,6,7,8
Confirmation tone on user call = disabled
243
1,2,5,6,7.8
Reset wait time (after hang-up or after lock-release): 10 sec
(default)
244
3,5,6,7,8
Reset wait time (after hang-up or after lock-release): 1 sec
208
5,7,8
Enables “Reset wait time" on lock-release command
(default)
209
1,5,7,8
Disables “awaiting reset time" on lock-release command (awaiting response time or talk time will be
activated)
249
1,4,5,6,7.8
Send call: single
(default)
250
2,4,5,6,7.8
Call transmission: triple
Button tones
142
2,3,4,8
Button press tone ON
(default)
143
1,2,3,4,8
Button press tone OFF
Button backlighting management
158
2,3,4,5,8
OFF mode: Button LEDs always off
159
1,2,3,4,5.8
ON mode: Button LEDs always on
160
6.8
AUTO mode: Button LEDs on at night and off during the day, thanks to the twilight sensor
(default)
161
1,6,8
Enables brightness control for the button LEDs.
f
Press a button repeatedly for each module to change the individual brightness of the buttons
(see:
“Adjusting the brightness of the button LEDs and the camera light”
)
162
2,6,8
Light-me OFF
(default)
163
1,2,6,8
Light-me ON: the button LEDs for the audio/video module are always on and when the button is
pressed all button LEDs light up (see:
“Light-me function behaviour on the basis of the LED
150
2,3,5,8
Light-me time: 30 sec
151
1,2,3,5,8
Light-me time: 60 sec
(default)
152
4,5,8
Light-me time: 120 sec
Camera LED light management on self activation (only with Art. UT1020)
166
2,3,6,8
The LED light is always off upon self activation
167
1,2,3,6,8
The LED light copies the ON/OFF/AUTO mode set for calls (functions 168/169/170)
(default)
Camera LED light management upon calls (only with Art. UT1020)
168
4,6,8
OFF mode: LED light always off upon calls
169
1,4,6,8
ON mode: LED light always on upon calls
170
2,4,6,8
AUTO mode: LED light on at night and off during the day, thanks to the twilight sensor
(default)
171
1,2,4,6,8
Enables brightness control for the camera LED light.
f
Press the programming confirmation button repeatedly to adjust the brightness
Restore backup
114
2,5,6,7
If the audio/video module is replaced, all programming is imported (only available if at least one
additional module is connected vi flat cable)
Reset
115
1,2,5,6,7
Reset button programming:
if the modules are addressed (see
resets the programming for the button call addresses
254
2,3,4,5,6,7,8
Reset special programming:
restore all the parameters described in this table to their default values
Содержание UT1010VC
Страница 10: ...10 Flush mounted installation 2 1 2 UP 5 3 4 1 Optional BLACK Optional RED...
Страница 12: ...12 Installation with side by side boxes Before installing the boxes in the wall fit the spacers...
Страница 13: ...13 Wall mounted installation 2 UP 5 3 4 UP 1 2 3 1 Optional BLACK RED Optional...
Страница 15: ...15 Installation with side by side boxes...
